Skip to content

Gabriel — Upholstery selection support

Focus
Upholstery selection support
Next step
Clarify the relevant material context
  1. Brief
  2. Sample
  3. Approval
  4. Order context

Development review board

Brief

Start with the seat rather than an isolated fabric label. Describe whether the material will wrap a compact meeting chair, a generous lounge form or a shared contract bench. Identify the upholstery reference and the difficulty to resolve: a seam opening, a change in handfeel, an awkward cutting layout or a colour that shifts beside another finish. Include the intended care routine and any requirement set by the project specification. A clear brief separates what the fabric must do from the appearance the interior designer hopes to achieve.

  • Use environment
  • Processing conditions

Explore

Use the sample stage to compare construction routes without treating a sketch as an approval. Record fiber composition, GSM in g/m² and usable width in cm beside the sample identity. If a different yarn or weave construction is being considered, ask what change the new swatch is intended to demonstrate. A softer surface may invite closer review of pilling, while a firmer construction may behave differently around corners. Natural and synthetic options deserve comparison through the actual seating and cleaning context; a fiber family alone does not settle durability or environmental performance.

Input
Target change
Output
Sample question

Evaluate

Define a review gate before moving from swatch to order discussion. For abrasion resistance, request the method, specimen condition and endpoint rather than a bare result. ISO 12947-2 and ASTM D4157 answer different wear questions, so keep the standard number with the figure. Review seam slippage separately where the upholstery puts tension across a joining line, and request ISO 13936-2 for that question and ISO 12945-2 when pilling is part of the brief. Keep colour and appearance observations tied to a dated physical reference, and compare a proposed batch with that reference under consistent lighting. If the project requires a fire performance record, identify the applicable assembly and destination requirement; a fabric-only result may not describe the upholstered seat. These are material evaluation steps, not substitutes for the project specification.

Share the development brief

For the next handoff, distinguish the requested quantity from any confirmed supply quantity and identify the destination. Ask how an available colour would be matched to a current lot, or how a new colour would move through sample review. Existing selection can reduce the number of design decisions, while custom development introduces additional approval points. Neither route removes the need to agree usable dimensions, finish, shade tolerance and the relevant order terms.

Prepare the next handoff

Share the sample reference and order context.